使用方便，无需安装，适用于所有类型汽车使用，并且可以用于室内，该产品的*大优点是使您**驾驶，自由通话，使工作，对话互不干扰。
使用拾音夹设计，适合所有类型的手机
有效防止电磁波辐射，减少因长时间通话时手机电磁波对人体的伤害
有效抑制EMI引起的噪声。
有喇叭和耳机两种接听方式选择，满足隐私通话要求
汽车室内两用：在室内用时，需要另购配件（220V电源转12V电源转换器--本商城有售）
内置扩充的点烟器座(图示4)，当您的这个设备使用汽车上的点烟器插孔时，这个分出来的点烟器孔可以让你使用别的设备。
使用指南：
1、在车内选择合适位置来固定手机座，确保不会妨碍您的行车**
2、按下手机支架的吸盘锁紧扣，使吸盘牢牢吸附在汽车玻璃及台面的适当位置，如果在车上找不到光滑的平面时，也可以在吸盘上用两面胶固定，但固定前请把桌面仔细清洁(图示1)
3、按下手机座一侧释放按键，其两边的夹臂自动弹开(图示2)，将您的手机放在夹臂中间，将其牢牢夹紧将主机电源插头插入汽车点烟器，按下电源开关(图示5)，电源指示灯亮，表明系统已经通电，进入工作状态。
4、将主机连接线上的拾音夹夹在手机的听筒位置，注意其海绵垫的圆孔位置对准听筒的中心(图示3)，当手机来电或拨号，连接时，手机听筒的声音从免提主机的喇叭里播放出来，在通话过程中，调节主机一侧的音量控制器(图示6)，可以改变音量的大小，获得您满意的效果
5、为了保证通话隐私，可以在来电或拨号时，将外接耳机（另购买）插上主机的耳机插孔内，既可关闭喇叭声音，戴上耳机进行通话(图示6) (随货配件配有耳机)
6、通话结束后，手机会自动挂机，不使用免提时，可以按电源开关关闭其电源(图示5)。
备注说明
注意事项：
为避免手机信号的EMI噪声以及引起啸叫，请不要将手机和免提主机靠得太近。通话时，为保证话音清晰，应尽量将手机的麦克风朝向通话者使用免提行车通话时如对方说话太大或者对方嘴太接近话筒，可能有轻度影响通话质量
UNIVERSAL HANDSFREE CAR-KIT
USER MANUAL:
1.plrg the device info the cigaette light socket and LED will
light on to indicate he system power is switch on.
2.squeze the voice collector clip on the cellular phone's
earphone,(the clip must aim at the earphone)
3.put the cellular phone on the cushion (to refrain from the
noise caused by the electrom aguetice wave,the cellular
phone should away frim the hands free kits 300mm least)
4.the signal indicator will fiash when a calling signal recelved.
5.push th ok button on the cellular phone to answer the call.
6.you can use the volume control function to adjust the
qualification of communication.
THE functions:
1.concentrated to your driving while answering the phone call
2.far from the radiation
3.cleary communicate environment,private conversation with earphone
4.suitable for all kind of caars with cigarette lighter socket
备注说明
ST009 hands-free for mobile phones
Easy to use. No installation required. It fits all type of card. It could also be used indoor. The greatest advantage for this product is to take away the interruption of talking while working. It certainly makes driving safer.
Using sound collection clip technology, it works on all kinds of mobile phones.
Reduced the radiation from the magnetic wave. It helps on lowering the body harm caused by magnetic wave from mobile phones.
Lower effective EMI noise
Both speaker and earphone methods: satisfying privacy requirements
In-car/in-house: when used in-house, additional accessories needed(220V to 12v power adapter sold separately in store)
Imbedded cigarette lighter expansion base allows you plug in extra device when used.
Users Guide:
1, Find a suitable location for fixing the phone base. Make sure no interference with safe-driving.
2, Press down phone rack sucking base. Make sure it sucks firmly on the glass or dash board. If you can you find the smooth surface to attach, use the two-sided glue provided on the base. Clear the surface before attach(Figure 1)
3, Press the release button at the base. The two arms will expand automatically (Figure 2). Place your phone between the arms tightly. Plug the power to the cigarette lighter.
Turn on the power switch (Figure 5). Power indicator should light up. It indicates operational state.
4, Connect the sound collection clip to the speaker location. Make sure the hole line up with the receiver. When receiving incoming call, dialing and connection, the sound gets broadcasted out through hands-free speaker. You could adjust the volume using the control(Figure 6) on the side of the unit to achieve satisfactory result.
5, To protect privacy, you could plug in the external ear piece (included in the package). It will shut off the speaker.
6, When calls end, the phone will hang up automatically. If hands-free unit not in use, you could turn off the power(Figure 5).
Note:
To reduce the EMI noise and interference, please keep distance between the phone and hands-free unit. To improve voice quality, turn microphone towards the speaker.
When using the hands-free, high voice or too close to the speaker might cause degradation of overall talking quality.
|